2024 NFPA 70E Safety Training 2CE
Approved for 2CE's in MN, SD, NE, WY, MT, CO- Non-Code Technical Training
A popular electrical safety class we offer has been updated to the 2024 Version. The OSHA 70E, 2-hour version, is a condensed version of our four-hour presentation. It is more technically focused on the worker’s safety responsibilities and technical equipment and PPE information. Only briefly does the class cover the administration of the electrical safety program.
Your Certificate of Completion will be available upon completion.
Regular price: 50.00
Discounted member price: 46.00
|
| TC2370E2 |
2023 NEC Grounding and Bonding for Unlicensed Personnel
2CE - Approved in MN, MT, SD, NE, CO & WY
Based on the 2023 NEC.
This course will be presented and discussed to allow participants to apply the 2023 NEC in their daily electrical work. This course will also touch on the following topics and more:
1. Introduction to grounding and bonding terminology
2. General requirements for Grounding and Bonding
3. Effective ground fault current path
4. Bonding jumpers for panels
5. Grounding of electrical equipment
6. Bonding of metal components
This class provides an overview of the National Electrical Code's bonding and grounding requirements for residential and commercial buildings, ensuring compliance with code standards. The course covers both theory and code-compliant installation practices, with ample opportunities for students to ask questions. Students will gain an excellent understanding of how to size ground wires for bonding and connecting electrical service ground systems by reviewing data tables found in Article 250. Additionally, the class covers different grounding components, providing students with a comprehensive understanding of the acceptable products to use when creating a safe and well-grounded system.
Regular price: 50.00
Discounted member price: 46.00
|
| TC23GBUNL |
2023 NEC Motors, Controls & GFCI
Approved for 2 CEU's in MN, SD, NE, WY, CO, MT
Based on the 2023 NEC.
This class explores the concepts of motors, their feeder circuits, overload and short circuit protection along with control concepts. You will study a motor nameplate to determine proper ratings of fuses, branch circuit conductors, disconnect sizes and other data required for a compliant installation. The class also focuses on control wiring and control wire protections and functions. Finally the attention turns to GFCI’s, how they work, and where they are required in dwelling and other than-dwelling unit locations.
Regular price: 50.00
Discounted member price: 46.00
|
| TC23GFCI |
2023 NEC Lawn Irrigation Systems Part 1
2CE - Approved in MN, SD, NE, WY, CO, MT
Based on the 2023 NEC.
The objective of the two-hour class is to have the participant use and comply with information that is available in the National Electrical Code® (2023 edition) and be able to determine the requirements for lawn irrigation systems as an installer or service technician for low voltage wiring and equipment, specifically Class 2 and Class 3 Circuits.
Your Certificate of Completion will be available upon completion.
Regular price: 50.00
Discounted member price: 46.00
|
| TC23LIS |
2023 NEC Lawn Irrigation Systems Part 2
2CE - Approved in MN, NE, MT, CO, WY
Based on the 2023 NEC.
The objective of the class is to have the participant use and comply with information that is available in the National Electrical Code® (2023 edition) and be able to determine the requirements for lawn irrigation systems as an installer or service technician for low voltage wiring and equipment, specifically Class 2 and Class 3 Circuits with familiarization with motor, controls, and protection.
Your Certificate of Completion will be available upon completion.
Regular price: 50.00
Discounted member price: 46.00
|
| TC23LIS2 |
2023 NEC Motors & Transformers
2CE - Approved in MN, SD, NE, MT, WY, CO
Based on the 2023 NEC
Motors and Transformers serves to provide an in-depth discussion on motors and how the National Electrical Code addresses rules associated with wiring them. We will look closely at electrical protection techniques of motors from the standpoint of short circuits and overloads. Students will gain a keen perception for selecting the correct equipment for these tasks as well as some basic rules of Code relating to installation of transformers.
Your Certificate of Completion will be available upon completion.
Regular price: 50.00
Discounted member price: 46.00
|
| TC23MTS |
2023 NEC Overcurrent Protection for Unlicensed Personnel
2CE - Approved in MN, MT, SD, NE, CO & WY
Based on the 2023 NEC.
Whether you're an entry-level employee or simply in need of a refresher course on overcurrent protection (OCP), this class is a must-have. It starts with an in-depth discussion on the theory behind OCP and explores the various types of devices that comprise this code-required protection for branch circuits, feeders, and services. You'll also learn about areas where OCP devices are prohibited and times when they should not be used. In addition, the course covers overcurrent protection related to AFCI's and GFCI's, as well as a discussion on different styles of fuses that are both current limiting and non-current limiting.
Regular price: 50.00
Discounted member price: 46.00
|
| TC23OCPU |
2023 NEC You Be The Inspector - Part 1
2CE - Approved in MN, SD, NE, WY, CO, MT
Based on the 2023 NEC.
This is a presentation that is less conventional than others you may have attended by the Electrical Association. It takes away your tool belt and puts you in the shoes of the electrical inspector. It is a fun class that enables the participant to actually follow in the footsteps of the regular inspector making decisions on wiring installations that are, or are not code compliant. By viewing photography of electrical installations, you respond to electrician's concerns and sometimes uniformed homeowners about what must be changed or what is accepted. It's a fast-moving class that covers all types of wiring from industrial to commercial to farm and residential installation.
Your Certificate of Completion will be available upon completion.
Regular price: 50.00
Discounted member price: 46.00
|
| TC23YBI1 |
2023 NEC You Be The Inspector - Part 2
2CE - Approved in MN, SD, NE, MT, WY, CO
Based on the 2023 NEC.
Part 2 Continues the journey of you as the electrical inspector. Some of the installations viewed in the photography are examples of exemplary work while others may make you shudder. The outcome of this class is a great review of many of the chapters from the code book. Each student is provided a multi-page handout upon completion of the course complete with NEC references for each question in the presentation. The presentation is based on the 2023 NEC. Under the guidance of a seasoned master electrician, you will gain a keen understanding of the differences in proper and improper wiring methods.
Your Certificate of Completion will be available upon completion.
Regular price: 50.00
Discounted member price: 46.00
|
| TC23YBI2 |
2023 NEC Lawn Irrigation Systems Parts 1 & 2
4CE - Approved in MN, SD, ND, NE, CO, WY, MT & ID
Based on the 2023 NEC.
The objective of the four-hour class is to have the participant use and comply with information that is available in the National Electrical Code® (2023 edition) and be able to determine the requirements for lawn irrigation systems as an installer or service technician for low voltage wiring and equipment, specifically Class 2 and Class 3 Circuits.
Your Certificate of Completion will be available upon completion.
Regular price: 99.00
Discounted member price: 89.00
|
| TC23LISP12 |